Installing The Discharge Chute; Filling The Engine With Oil - Toro 38710 Operator's Manual

2

Installing the Discharge Chute

Parts needed for this procedure:
1 Bolt (1/4–20 X 1–1/2 inch)
1 Locknut (1/4–20 inch)
Procedure
Insert the chute post through the bracket into the base of the
machine and secure it using a bolt and a lock nut
1. Chute post
2. Bolt (1/4–20 X 1–1/2 inch)
3

Filling the Engine with Oil

No Parts Required
Procedure
Your machine comes with oil in the engine.
(Figure
Figure 4
3. Locknut (1/4–20 inch)
4. Bracket
Model
38710
Oil type: automotive detergent oil with an API service
classification of SJ, SL, or higher.
Use Figure 5 below to select the best oil viscosity for the
outdoor temperature range expected:
4).
1. Move the machine to a level surface.
2. Clean around the oil fill cap.
3. Check the oil level and add oil if necessary.
Note: Do not tighten the dipstick when checking the
oil level.
5
Max fill
0.5 L (16.9 oz)
Figure 5