Getting To Know Your Cooktop - Westinghouse WFE912SA User Manual

GETTING TO KNOW YOUR GAS COOKTOP
USING YOUR GAS HOTPLATES
NOTE: Gas controls turn anticlockwise from 'Off'
and have limited movement.
LIGHTING BURNERS
Electronic ignition
These hobs are fitted with mains powered electronic
ignition. When the appliance has been connected and
the power is on, depressing any knob will release sparks
to all burners. To light a burner, depress the corresponding
knob and while continuing to depress knob turn anticlockwise
to 'HI' position. The knob may be released once the flame
is established, and turned further anticlockwise to reduce
the flame height as desired.
Flame safeguard models WFE914 & WFE916
Models with flame safeguard have the same ignition
procedure as electronic ignition, but require the knob to
continue to be depressed after flame is established for
approximately 5 seconds. If the flame goes out when
the knob is released, simply depress the knob again, this
time holding it down with slightly more force for the same
length of time.
WARNING
WARNING
• Keep hands clear of burners when lighting.
• If burner does not light within 5 seconds, turn knob to 'Off'
position, allow gas to disperse, then try lighting again.
• Burners MUST be operated between 'HIGH' and 'LOW'
settings only.
ENVIRONMENTAL TIPS
To conserve gas, place the pan centrally over the burner
and adjust the flame so that it does not go past the edge
of the cookware.
NOTE: In the absence of electrical power, carry out the
ignition directly to the burner with a hand held ignition
source.
MODEL WFE912 & WFE914
MODEL WFE916
1. LOW HEAT BURNER (5.1MJ/H)
Used for simmering with small cookware items.
2. MEDIUM HEAT BURNER (9.0MJ/H)
Used for normal cooking and simmering with mid size
cookware items.
3. HIGH HEAT BURNER (12.1MJ/H)
Used for fast heating with large size cookware items.
4. INTENSE HEAT WOK BURNER (14.4MJ/H)
Used for very fast heating with woks and other large
size cookware items. Use wok trivet provided when
cooking with a wok.
USAGE
13