Fiat Bravo Owner's Handbook Manual page 30

Õ
Note Every press on button
creases/decreases by 1 unit. Keeping the
button pressed obtains automatic fast in-
crease or decrease. When you are near
the required setting complete adjustment
by single presses.
– if selecting "Mode": briefly press but-
ton MODE, "24h" or "12h mode will
flash on the display;
Õ Ô
– press button or to select "24h" or
"12h".
After setting, briefly press button MODE
to go back to the submenu screen or
press the button for long to go back to the
main menu screen without storing set-
tings.
– press again button MODE for long to
go back to the standard screen or to the
main menu according to the current menu
level.
Ô
or in- Set date (Setting the date)
This function enables to update the date
(day – month – year).
To correct the date proceed as follows:
– briefly press button MODE: "year" will
flash on the display;
Õ
– press button
– briefly press button MODE: "month"
will flash on the display;
Õ
– press button
– briefly press button MODE: "day" will
flash on the display;
Õ
– press button
Note Every press on button
creases/decreases by 1 unit. Keeping the
button pressed obtains automatic fast in-
crease or decrease. When you are near
the required setting complete adjustment
by single presses.
– briefly press button MODE to go back
to the menu screen or press the button
for long to go back to the standard screen
without storing settings.
Engine oil information
(Engine info) (where provided)
You can display engine oil information
(pressure) in place of the date. Follow the
instructions below to turn on/off engine
oil information display:
– briefly press button MODE: on the dis-
Ô
play you will see "Engine info repetition";
or for setting;
– press button
to turn on or "OFF" to turn off;
Ô
– briefly press button MODE in order to
or for setting;
return to the menu screen or keep the
pushbutton pressed in order to return to
the standard screen without memorizing.
Ô
or for setting.
Turn the ignition key on MAR, after the
Õ Ô
initial check stage the multifunction display
or in-
that can be reconfigured, will show (if pre-
viously enabled) engine oil information.
Õ Ô
or and select "ON"
29