Assembly diagram fig. 4
The tow-hook structure must be secured
at the points indicated with
tal of 2 M8 bolts, 4 M10 bolts and 2 M12
bolts.
The hook should be fastened to the body
avoiding any type of drilling and trimming
of the rear bumpers that remains visible
when the hook is removed.
After fitting, screw holes shall be sealed to
prevent exhaust gas inlet.
138
Ø
with a to-
fig. 4
Existing hole
Existing holes
Ball to 94/20 EC standard
Existing
holes
Existing holes
Existing holes
F0Q0249m