Toro Power Max 828 OXE Operator's Manual page 5

112-6625
Reorder part no. 112-6629
1. Cutting/dismemberment hazard, impeller—do not place
your hand in the chute; stop the engine before leaving the
operator's position, use the tool to clear the chute.
1. Left turn control
2. Traction drive—squeeze
the lever to engage; release
the lever to disengage.
Briggs Part No. 273676
1. Stop
2. Slow
Briggs Part No. 274681
1. Fuel—On
3. Warning—read the
Operator's Manual.
4. Cutting/dismemberment
hazard, impeller—do
not place your hand
in the chute; stop the
engine before leaving the
operator's position, use the
tool to clear the chute.
3. Fast
2. Fuel—Off
112-6627
5. Cutting/dismemberment
hazard, impeller—keep
away from moving parts;
remove the ignition key and
read the instructions before
servicing or performing
maintenance.
6. Thrown object
hazard—keep bystanders
a safe distance from the
snowthrower.
Briggs Part No. 276923
1. Primer
2. Choke off (Run)
3. Choke on (Choke)
5
7. Auger/impeller
drive—squeeze the lever to
engage; release the lever
to disengage.
8. Right turn control
4. Ignition key in
(Engine—Run)
5. Ignition key out
(Engine—Stop)