Components - Nintendo Wii Manual

3

Components

Wii Console (RVL-101(EUR))
POWER LED POWER Button
Shows the status of the Press to turn the console on or off (Standby Mode).
Wii console.
NOTE: The POWER LED does not go out when the power is turned off.
b Green
Console power is ON.
b Orange
Standby Mode,
WiiConnect24 is ON.
b Red
Standby Mode,
WiiConnect24 is
OFF.
RES ET
Press to restart a game.
SYNC.
Press the SYNC. Buttons on the Wii Remote or Wii Remote
Plus and the Wii console simultaneously to synchronise the
Wii Remote or Wii Remote Plus. See pages 29 – 30.
Sensor Bar Connector
Connects to the Sensor Bar.
DC Input Connector AV Multi Out Connector
Connects to the Connects to the AV cable
Wii Power Supply. for your television.
12
SD Card Slot EJECT Button
For inserting an SD Card. Press to eject a Wii Disc.
Air Vent
Do not block.
USB Connectors
Connect USB devices
such as the Wii LAN
Adapter (RVL-015) (sold
separately).
Do not connect any
device that is not
supported by Nintendo.
Battery Cover
For access to lithium button battery (CR2032). The battery cover can
be removed to replace the lithium button battery if necessary. See
page 10 for more information on replacing the lithium button battery. Do
not remove the battery cover unless instructed to do so by a Nintendo
Service Centre representative.
Air Intake
13