Toro 04380 Operator's Manual page 16

Controls
forward to tighten adjustment.
Water Temperature Light (Fig. 9)—This light glows
and the engine automatically shuts-down when the
engine coolant temperature gets too high..
Two-Speed Transport Switch (Fig. 9)—When the
switch is moved to the forward position, the engine will
Figure 11
runt at maximum engine speed (2800 rpm). When
1. Fuel shut off (under fuel tank)
moved to the rear position, the engine will run at a
slower engine speed (2300 rpm) for quieter operation.
Battery Warning Light (Fig. 9)—Light glows if the
battery charge is low.
Oil Pressure Light (Fig. 9)—Light glows if the engine
oil pressure drops below a safe level.
Raise/Lower/Mow Control (Fig. 9)—Moving this
control forward during operation lowers the cutting units
and starts the reels. Pull back on the control to stop the
reels and raise the cutting units. During operation, the
reels can be stopped by pulling back on the control
momentarily, then releasing it. Restart the reels by
moving the control forward.
Seat Adjusting Handle (Fig. 10)—The lever on the left
side of the seat allows seven-inch fore and aft
adjustment.
Figure 10
1. Seat adjusting handle
Fuel valve (Fig. 11)—Close the fuel valve under the
fuel tank when storing the machine.
16