Philips CSS5530B User Manual page 13

Set up speaker distance
Wireless connection causes audio delay latency.
Set up the speaker distance to synchronize
audio output among the front speakers, rear
speakers and subwoofer.
1
Press DELAY to enter setup mode.
» The display panel scrolls DELAY ADJ
(delay adjustment).
To exit setup mode, press EXIT
•
SETTINGS, or 3 seconds of button
inactivity occurs.
2
Press DELAY again to select a speaker for
distance adjustment.
3
Press Volume +/- to adjust distance for the
selected speaker.
• To exit setup mode without save, press
EXIT SETTINGS, or 3 seconds of
button inactivity occurs.
4
Repeat step 2 and 3 to set up the distance
for other speakers.
5
After the setup is complete, press EXIT
SETTINGS to exit.
» The value is saved and applied.
Set up speaker volume
Set up the speaker volume for optimal
surround sound.
1
Press VOL to enter setup mode.
» The display panel scrolls SPKR VOL
(speaker volume).
• To exit setup mode, press EXIT
SETTINGS, or 3 seconds of button
inactivity occurs.
2
Press VOL again to play test tone from the
speakers.
3
Then press VOL to select a speaker for
volume adjustment.
4
Press Volume +/- to adjust volume for the
selected speaker.
• To exit setup mode without save, press
EXIT SETTINGS, or 3 seconds of
button inactivity occurs.
5
Repeat step 3 and 4 to set up the volume
for other speakers.
6
After the setup is complete, press EXIT
SETTINGS to exit.
» The value is saved and applied.
EN
11