Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Healthstream HS 1050R

  • Page 2: Important Safety Information

    Important Safety Information Please keep this manual in a safe place for reference. 1. It is important to read this entire manual before assembling and using the equipment. Safe and efficient use can only be achieved if the equipment is assembled, maintained and used properly.
  • Page 3: Exploded Drawing

    Exploded Drawing...
  • Page 4: Parts Drawing

    Parts Drawing...
  • Page 5: Parts List

    Parts List...
  • Page 6 Assembly Instructions Remove all the parts of HS1050 ROWER from the carton and place them on the floor carefully. INSTRUCTION 1 Rotate the FRONT PULLING WHEEL BRACKET (12) and align the holes on the bracket to the holes on the SEAT TRACK BRACKET (1).
  • Page 7 INSTRUCTION 3 Attach the ROWER SEAT(14) to the SEAT CARRIAGE BRACKET(4) and secure, using HEX HEAD BOLT(17) and FLAT WASHER(27). MAKE SURE the high part of the seat is towards the back INSTRUCTION 4 Slide the SEAT WITH CARRIAGE(4) onto the ROWER SEAT TRACK(1). NOTE:MAKE SURE the high part of the seat is towards the back Attach the STOP BRACKET (5) to the ROWER SEAT TRACK(1) and secure using ALLEN HEAD BOLT(11) FLAT WASHER(27)and NYLON LOCK NUT(25).
  • Page 8 COMPUTER WIRE SENSOR WIRE SOCKET INSTRUCTION 4 Attach the BOTTOM CONSOLE (50B) to the FRONT PULLING WHEEL BRACKET (12) and secure using MACHINE SCREW(22-2pcs). Insert two batteries (AA size 1.5V) into the compartment of the COMPUTER CONSOLE (50A). Connect the sensor wire socket that comes out of the main frame to the computer wire plugs on the back of computer console.
  • Page 9: Computer Instruction

    COMPUTER INSTRUCTION Your computer is ideal for monitoring your performance and setting yourself targets . By measuring your performance you can ensure you exercise within your range. At the same time you can monitor closely your improving condition and fitness. TO START: Press SET key to activate the computer.
  • Page 10 4. If the monitor displays abnormally, please re-install the battery and try again. 5. Battery spec : 1.5V UM-3 or AA (2 pcs)

Table of Contents