1100 Power Assembly, Touchpad Module And Io Board - Lenovo ideapad 700-15ISK Hardware Maintenance Manual

1100 Power assembly, Touchpad module and IO board

For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 35
• "1030 Hard disk drive" on page 36
• "1040 PCI Express Mini Card for wireless LAN" on page 38
• "1050 SSD Card(On select models)" on page 40
• "1060 DIMM" on page 41
• "1070 Fan assembly and heat sink assembly" on page 44
• "1080 Speakers" on page 45
• "1090 System board" on page 46
Figure 10. Removal steps of power assembly, touchpad module and IO board
Remove screws
power assembly in the direction shown by arrow
Step Screw (quantity)
M2 × 6 mm, flat-head, nylok-coated (3)
1
Remove screws
shown by arrow
Step Screw (quantity)
M2.5 × 2.5 mm, flat-head, nylok-coated (2)
1
, and then remove the power assembly bracket. Remove the
1
, and then remove the touchpad module in the direction
1
.
2
a
b
ideapad 700-15ISK&700-17ISK
.
2
Color Torque
Silver/ 1.85+/-0.15 kgfcm
Black
a
Color Torque
Blcak 3.0+/-0.3 kgfcm
a
a
a
b
49