D-Link DIR-300A User Manual page 94

DIR-300A Wireless N150 Router
User Manual
Figure 79. The page for creating a new Static IPv6 connection. The IP section.
Parameter
IPv6 address
Gateway IPv6 address
Primary IPv6 DNS
server/Secondary IPv6
DNS server
Get IPv6
Gateway by SLAAC
Static IPv6 gateway
address
Obtain DNS server
addresses
automatically
Static primary DNS
server/Static secondary
DNS server
IP
For Static IPv6 type
Enter an IPv6 address for this WAN connection.
Enter an IPv6 address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.
For Dynamic IPv6 type
Select a method for IPv6 address assignment from the drop-down
list or leave the Automatically value.
Select the checkbox to automatically assign the IPv6 gateway
address with help of SLAAC (Stateless Address Autoconfiguration).
The static address of the IPv6 gateway. The field is available for
editing, if the Gateway by SLAAC checkbox is not selected.
Select the checkbox to configure automatic assignment of IPv6
DNS server addresses. If the checkbox is selected, the Static
primary DNS server and Static secondary DNS server
fields are not available for editing.
Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.
Page 94 of 181
Configuring via Web-based Interface
Description