D-Link DIR-300A User Manual page 105

DIR-300A Wireless N150 Router
User Manual
Parameter
Obtain DNS server
addresses
automatically
Primary DNS server/
Secondary DNS server
Vendor ID
Hostname
Isolate connection
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Ping
For PPTP + Dynamic IP and L2TP + Dynamic IP types
Select the checkbox to configure automatic assignment of DNS
server addresses. If the checkbox is selected, the Primary DNS
server and Secondary DNS server fields are not displayed.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
The identifier of your ISP. Optional.
A name of the router specified by your ISP. Optional.
When the checkbox is selected, the router uses an alternate routing
table for this connection. Select the checkbox only when your ISP
requires this.
Select the checkbox to allow using RIP for this connection.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the router to answer ping requests
from the external network through this connection. For security
reasons, it is recommended not to select this checkbox.
Page 105 of 181
Configuring via Web-based Interface
Description