D-Link DIR-300A User Manual page 93

DIR-300A Wireless N150 Router
User Manual
Figure 78. The page for creating a new Static IPv6 connection. The Ethernet section.
Parameter
MTU
MAC
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC address of your computer icon
( ) to set the MAC address of the network interface card (of the
computer that is being used to configure the router at the moment)
as the MAC address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the
drop-down list (the field will be filled in automatically).
You can click the Restore default MAC address icon (
set the router's MAC address.
Page 93 of 181
Configuring via Web-based Interface
Description
) to