Using the Mid-Size Weight
Weights are installed on certain mowers to improve
balance and improve performance. The weights can be
moved or removed to create optimized performance
under different mowing conditions and for operator
preference (Figure 17 or Figure 18).
The following table indicates the position of the weight
as installed at the factory.
Mower Deck Size
Number of weights
91cm
The front end of the machine can rapidly rise
up when the mower is removed. This could
cause serious injury to you or bystanders.
Support the rear of the machine when removing
the mower from the carrier frame.
Figure 17
Installing the front weight.
1. Bolt
2. Washer
Position of the
install
weight
1
Front
3. Weight
4. Nut
Installing the rear weight.
1. Nut
2. Weight
21
Figure 18
3. Washer
4. Bolt