2. Installing the Discharge
Chute
1. Position the holes in the sides of the discharge chute
over the bolts ends on the sides of the chute handle.
(Figure 4).
Figure 4
1. Discharge chute
2. Bolt ends
2. Secure the sides of the discharge chute with 2 washers
and 2 locknuts.
3. Rotate the discharge chute to the upright position.
4. Install the knob tightly onto the bolt end at the rear of
the discharge chute.
3. Knob
Product Overview
Figure 5
1. Discharge chute
2. Chute handle
3. Handle
Figure 6
1. Choke lever
2. Key switch
5
4. Control panel
5. Rotor blade
6. Fuel tank
3. Primer
4. Recoil start