BMW K 1200GT Owner's Manual page 107

front suspension as shown
in illustration.
Insert ABS sensor cable in
two retaining clips 7.
Remove adhesive tape from
wheel rim.
Install front mudguard and
screws 1 on right and left.
Switch on ignition.
Wait for ABS self-diagnosis
to complete.
Press the handbrake lever
firmly a number of times un-
til the resistance point is no-
ticeable.
Removing rear wheel
Make sure ground is level
and firm and place motorcy-
cle on its center stand.
Remove bolt 1 of muffler
cover 2.
Pull cover towards rear.
Remove clamp 3 on muffler.
Do not remove sealing
grease from clamp.
Remove bolt 4 of end muf-
fler bracket on rear footrest.
Turn end muffler down.
7
105
z