Customizing The Function Settings - Onkyo DR-S2.2 Instruction Manual

Customizing the Function Settings

The procedure on this page describes how to operate the
menus on the Setup screen. These menus are used to set
and adjust a number of system settings. The various
functions that can be adjusted are covered throughout
this manual. The procedure on this page provides a basic
outline for using the Setup screen menus.
Using the Setup Screen Menus
1
Press ON (STANDBY/ON on the
front panel).
2
Press SETUP.
The Setup screen appears.
Example (North American model)
Video1
3
Use the cursor buttons (2/3) to
select the menu you want.
As each menu is selected with the cursor,
the settings appear below the menu
heading.
4
Use the cursor buttons (∞) to enter
the menu.
The top item within the menu becomes
highlighted.
Example (North American model)
Video1
5
Use the cursor buttons (5/∞) to
select the setting you want to
change.
The options available for each setting
appear to the right when the setting is
selected. The current setting appears with
the setting indicator lit.
64
Language General
V2
TV Screen — 4:3(Letter Box)
Component Video — Interlace
Setup Video
Adjust video format/quality
Move SETUP Exit
Language General
V2
TV Screen 4:3(Letter Box)
Component Video 4:3(Pan&Scan)
16:9(Wide)
Select your display preference
Move SETUP Exit
ENTER Select
6
Use the cursor buttons (3) to enter
the setting options.
Example (North American model)
Language General
Video1 V2
Component Video
Select Interlace or Progressive
output Component Video
Move
• Not all menu options can be changed
while a disc is playing. In these cases,
the options appear grayed out on the
screen and cannot be adjusted. To
change these settings, press 7 first
before pressing SETUP.
• Operating the menu after pressing 7
may cancel the resume function.
• Some menu options are not immediately
effective if set while a disc is playing. To
make these settings effective, stop
playback and then start again, or
change the settings while the disc is
stopped.
7
Use the cursor buttons (5/∞) to
select a new setting and press
ENTER to set the new setting in
memory.
Press RETURN or the cursor button (2) to
exit the options without making any
changes.
8
Press RETURN or the cursor button
(2) to go back to the main menu bar
to select another menu.
9
Press SETUP to close the Setup
screen.
The Setup screen closes.
Notes
• If you turn off the DVD Receiver during setup, the settings are
canceled. Press SETUP to finish the setup.
• The memorized resume position may be erased by setup.
• The Setup screen always shows the latest settings.
TV Screen — 16:9(Wide)
— Interlace
Progressive
Auto Progressive
ENTER Select SETUP Exit