Onkyo DR-S2.2 Instruction Manual page 14

Index to Parts and Controls
Rear panel
Shapes of jacks vary depending on the area which it was purchased.
1 ANTENNA terminals [24, 25]
These terminals are for connecting the FM antenna and AM
antenna.
2 MON OUT jacks [16, 17]
The monitor output includes both RCA type and S video
configurations. This output is for connecting television monitor or
projector.
3 VIDEO (VIDEO 1 IN / VIDEO 2 IN/OUT) jacks [21]
There are 2 video inputs and 1 outputs. Connect LD players, VCRs
or other video components to the video inputs. The video output
channel can be used to connect video tape recorder for making
recordings.
4 z REMOTE CONTROL connector [23]
Connect the Onkyo components that have z connectors such as
a CD player, and cassette tape deck using the z cables provided
with them. When these components are interconnected, they can
be controlled from the remote controller provided with the DVD
Receiver.
After connecting the z connectors, check the operation of the
remote controller buttons for use in controlling other components.
5 S VIDEO (VIDEO 1 IN / VIDEO 2 IN/OUT) jacks [21]
There are 2 video inputs and 1 output. Connect LD players, VCRs
or other video components to the video inputs. The video output
channel can be used to be connected to video tape recorder for
making recordings.
6 DIGITAL OUTPUT OPT jack [21, 22]
This jack is for connecting MD recorder, CD recorder, hard disk
recorder or other component with optical fiber cable.
7 DIGITAL INPUT (VIDEO 1 COAX, VIDEO 2 OPT) jacks [21]
These are the digital audio inputs. There are 1 digital input with
optical jacks and 1 with a coaxial jack. The inputs accept digital
audio signals from MD players, hard disk recorders, CD players, or
other digital source component.
8 (European models)
AV CONNECTOR terminal [17]
Use a 21-pin SCART cable to connect to a TV or monitor
compatible with this type of connection. Both audio (2 channel
stereo) and video (Video, S-video, and RGB) signals are output
from the AV CONNECTOR.
14
1 2 3 4
ANTENNA
MON 2 – –VIDEO – – 1 MON
OUT OUT
OUT IN IN
VIDEO
AM
OUT IN IN OUT
SUB
WOOFER
PRE OUT
AUDIO
FM
75
VIDEO2 VIDEO 1 TAPE
CDR/PC MD/HD
9 0
5 6
DIGITAL INPUT
REMOTE
CONTROL VIDEO 2 VIDEO 1
DIGITAL
VIDEO 2 VIDEO 1 OUTPUT
OUT IN IN
OPT
COAX
OPT
S VIDEO
FRONT SPEAKERS
A
R L
IN IN
L
AUDIO
R
TV/LINE
DIGITAL INPUT
VIDEO 2 VIDEO 1
OPT COAX
FRONT SPEAKERS
L
R
(Other models)
COMPONENT VIDEO OUTPUT Y/P
If your TV or monitor has component video inputs, you can produce
a higher quality picture on your TV or monitor by connecting to the
component video outputs on this unit.
9 SUB WOOFER PRE OUT jack [18, 19]
This terminal is for connecting an active subwoofer.
0 AUDIO L/R (TV/LINE IN / TAPE/MD/HD IN/OUT /
VIDEO 1 IN / VIDEO 2/CDR/PC IN/OUT) jacks [16, 17]
These are the analog audio inputs and outputs. There are 4 audio
inputs and 2 audio outputs. The audio inputs and outputs require
RCA type connectors.
When connecting a VCR or other video component, make sure you
connect the audio and video leads together (i.e., both to VIDEO 1).
- (North American and South American model)
FRONT SPEAKERS A/B, SURROUND SPEAKERS and
CENTER SPEAKER terminals [18]
FRONT SPEAKERS A system: To enjoy surround sound. Speaker
terminals are provided for the front left, front right, center, surround
left and surround right speakers.
FRONT SPEAKERS B system: To enjoy stereo sound. Speaker
terminals are provided for the front left and front right.
(Other models)
FRONT SPEAKERS, CENTER SPEAKER and SURROUND
SPEAKERS terminals [19]
Speaker terminals are provided for the front left, front right, center,
surround left and surround right speakers. Speaker outputs are
compatible with banana plug connectors.
7 8
North American and South
American model
COMPONENT VIDEO OUTPUT
Y
P B P
R
SURROUND CENTER
SPEAKERS SPEAKER
B
R L R L
-
8
European model
AV CONNECTOR
CENTER
SPEAKER SURROUND
SPEAKERS
R L
-
/P
B R
jacks [16]