Wfmm (Fm Modulator) - Audiovox VODEXL10 A Owner's Manual

WFMM (FM MODULATOR)

The FM Modulator allows the user to listen to audio through the vehicle's radio.
ON - Turns the wireless FM Modulator on if audio playback through your vehicle's radio is preferred.
OFF - Turns the wireless FM Modulator off.
FREQUENCY - Allows the user to select the wireless FM Modulator frequency. The unit has a 100 channel built-in wireless FM Modulator. The FM
Modulator can be set from 88.1 MHz to 107.9 MHz in 0.2 MHz steps, i.e. 88.1, 88.3, 88.5, 88.9, 90.1 etc.
To choose an FM frequency for audio playback through your vehicle's radio:
1. Press the SYSTEM MENU button to access the System Menu. The System Menu screens appears.
2. Use the u cursor button to highlight wireless FM modulator (WFMM).
3. Use the q cursor button to highlight the FREQUENCY Submenu.
4. Use the p q t or u cursor buttons to select a frequency not used by a radio station in the area. Press OK to select the highlighted frequency.
There are a total of 5 FM CHANNEL pages containing frequencies from 88.1 MHz to 107.9 MHz in 0.2 MHz steps. To access the additional FM Channel
pages, use the t or u cursor buttons to highlight the on screen left and right arrows and press OK. Once the frequency has been selected, tune the
vehicle's radio to the selected frequency.
5. Press the DVD button to restore the remote control to DVD functions.
Note: The wireless FM modulator will perform well in most applications. However, in certain geographical areas the quality of the wireless signal may be
less than optimal, resulting in static or strong local station bleed through. If this is a consistent problem, an FMDIRB (hard wired FM connection) can be
installed by your dealer.
PICTURE WFMM SETTING
ON OFF
FREQUENCY
88.10 88.30 88.50
88.90 89.10 89.30
89.70 89.90 90.10
90.50 90.70 90.90
91.30 91.50 91.70
17
88.70
89.50
90.30
91.10
91.90
EXIT