Samsung WF42H5100A series User Manual page 36

troubleshooting
Error imagE
bE2
tE1
3E
9E1/9E2
aE
aE8
8E
SF1
SF2
SF3
sud
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
BETTER_WF42H5200-03397A-10_EN.indd 36
A jammed key.
Call customer service.
A temperature sensor problem.
Restart the cycle. If the code reappears, call customer service..
A motor problem.
Restart the cycle. If the code reappears, call customer service.
High/Low voltage detected.
Restart the cycle. If the code reappears, call customer service.
A Communication error between the SUB(Sensor) PBA and the MAIN PBA
Call customer service.
A Communication error between the MAIN PBA and the INVERTER PBA.
Call customer service.
A MEMS sensor problem.
Call customer service.
A system error.
Call customer service.
Too many suds are detected during the wash session. The unit is put on hold until
the amount of suds have been reduced. The unit will then go back to operating.
36_English
mEaning & solution
2016/8/19 18:12:56