Using Steam Wash; Atc (Auto Temperature Control) - Samsung WF42H5100A series User Manual

washing a load of laundry

USInG STeAm WASH

If you select steam, the steam acts at the most effective times for the detected amount of laundry,
maximizing the effect of the steam, increasing the wash temperature, enhancing the Soak effect, and
improving wash performance. (Only for WF42H5200A* models)
1. Load the washer.
2. Press the power button.
3. Turn the Cycle Selector and select a steam cycle. (The Deep Steam course automatically selects
Steam.)
4. Press the steam button.
5. Add detergent to the dispenser tray and add fabric softener up to the marked line.
6. Press the start/pause button.
: The washer automatically selects the optimal wash conditions by sensing the weight of the laundry.
Steam may not necessarily be visible during the steam cycles. Steam may not be present during the
entire steam wash cycle.

ATC (AUTO TemPerATUre COnTrOL)

ATC is the control function that the washer controls water temperature with temperature sensor (thermistor).
Because there are numerous water temperatures depending on the customer's environments ( cold
areas, warm areas, various water temperature, settings of heater temperature, etcs), ATC function in
our washer maintains the certain level of wash temperature to output the best washing performance at
each cycle.
If you select normal & heavy duty cycles, those cycles are the regulation and UL course. Since new
washers must reduce the amount of energy usage at first priority, customers will notice more cold
water entering the washer. But This is Normal, not a problem.
In those regulation cycles, Hot temperature is similar to acceptable adult bath-water temperature and
warm temperature is similar to comfortable swimming-pool water temperature.
If customers want to wash clothes in specific water temperature, customers should choose a different
cycles at each temperature ( Hot/Warm/Eco Warm )
BETTER_WF42H5200-03397A-10_EN.indd 26
26_English
2016/8/19 18:12:50