Page 2
(including lost profits) in connection with the furnishing, performance or use of this material whether based on warranty, contract, or other legal theory. Sun, Sun Microsystems, and StorEdge are trademarks of Sun Microsystems Inc. All trademarks within this document are the property of their respective owners.
Installing a Barcode Reader A barcode reader enables your StorEdge™ L7 autoloader to read tape cartridge information contained in a barcode label attached to each of the data cartridges. This information becomes part of the application software’s library cartridge inventory. The barcode reader is installed by connecting it to the interface connector on the inside top panel of your autoloader.
Page 6
5. Locate the interface connector and mounting hole on the inside top panel of your autoloader directly above data cartridge storage slot 1. 6. Press the interface connector on the barcode reader into the mating interface connector on the inside top panel. 7.
8. Install the trim panel by snapping it into position in front of the barcode reader. 9. Connect the autoloader AC line cord to the AC source outlet. 10. Power up your autoloader by pressing the POWER button. NOTE: Your autoloader will automatically sense the barcode reader when power is applied.
Applying Barcode Labels to Cartridges After installing the barcode reader, before inserting any data cartridges into your autoloader, affix barcode labels to your data cartridges. See the StorEdge L7 User’s Guide for information on loading media into your autoloader. To install the barcode labels •...
Need help?
Do you have a question about the StorEdge L7 and is the answer not in the manual?
Questions and answers