Toro Power Shovel 38310 Operator's Manual page 3

Assembly
POTENTIAL HAZARD
Internal wiring could be damaged during
shipping or assembly.
WHAT CAN HAPPEN
Damaged wiring could cause serious personal
injury when operating the snowthrower.
HOW TO AVOID THE HAZARD
Use care so electrical wiring will not be
damaged during assembly.
If wiring is damaged, do not assemble the
snowthrower. Contact your Authorized Service
Dealer.
Assembling the Upper and
Lower Tubes
1. Remove the shipping wire secured to the upper and
lower tube sections (Fig.1).
2. Slide the adjustable handle onto the lower tube
(Fig. 2).
3. Slide the lower tube into the upper tube until the screw
holes line up (Fig. 3).
4
5
3
2
4. Secure the upper and lower tubes by inserting the
countersunk nut and the slotted screw (supplied in
loose parts bag) through the aligned holes in the tubing
(Fig. 3).
1
2197