S/Pdif Connection; Network Connection - D-Link MyChannel DSM-350 User Manual

Section 2 - Installation

S/PDIF Connection

If you want to connect the DSM-350 to a stereo system
digitally using an optical cable, connect one end of an
S/PDIF optical audio cable into the S/PDIF connector on
the DSM-350, and connect the other end to the optical audio
input of your audio system.
Note: This cable is not included with the DSM-350.
Connecting to a Switch/Router/Modem
Connect the included Ethernet cable to the network cable
connector, and attach the other end to a switch, router, or
modem on your network.
D-Link DSM-350 User Manual
S/PDIF Connection

Network Connection

DSM-350
S/PDIF CONNECTOR ON STEREO
DSM-350
SWITCH/ROUTER/MODEM
13