Setting The Organ Sound: Manual - Technics SX-F100 Owner's Manual

Part I
• EFFECT
This is the beautiful wide effect of many instru-
ments playing in unison.
• The type of effect can be changed. (Refer to
page 38 .)
• EFFECT can be set to on or off for each flute-
type tab sound and EXTRA TAB VOICES
sound.
Sounds and effects
11
SUSTAIN
SUSTAIN is the gradual fading out of musical
tones after the key is released.
• The length of the sustain can be adjusted .
(Refer to page 45.)
Setting the Organ sound: Manual
~ lllllfmmmrm1mrrrmmm~
= ·--·· .... ....... .
s rrmmnmHiliJIDil l i H !D!
After selecting the desired organ type , you can change the nuance of the sound by using the tab buttons
and the display to adjust its various components.
Outline of MANUAL settings
1. Select the organ type .
2. In the UPPER ORGAN or LOWER ORGAN
section, press the MANUAL button to turn it
on to change the sound for the respective
keyboard.
(MANUAL]
0
3. Use the tab buttons and the display to select
the desired sound . (Refer to the following sec-
tion .)
• Using the tab buttons
Organ sounds are obtained by combining dif-
ferent sound pitches (feet). By turning the tab but-
tons on and off , you can combine pitches to
modify the se lected organ sound.
Using the tab buttons to mod9fy the
souml
In the UPPER ORGAN or LOWER ORGAN sec-
tion, use the tab buttons to change the sound for
the respective keyboard .
CJLJoooLJCJCJDoo
lQWflll o•G AJrol
CJLJLJDuLJCJuo
36
o Using the display
Special tabs (EXTRA TAB VOICES) and effects
are provided for each individual organ type .
These effects, used along with the tab buttons,
allow you broad flexibility in creating the exact
sound you want .
• The sound components which you can adjust
differ depending on the type of organ .
• The settings are common for all the sounds in
the same organ group .
• The settings are memorized independently for
each organ group , so that whenever the
MANUAL sound is selected for the same
organ group, the sound you modified is auto-
matically available .
• In the PIPE ORGAN group (Classical,
Theatre), the sound settings can be made for
each type .
o
Press the lower part of a tab button to turn it
on, and the upper part to turn it off.
o
When an organ type from the DRAWBARS
group is selected , the tab buttons work as
drawbar-volume-setting buttons . In this case ,
press and hold the upper part of the button to
decrease the volume, and the lower part to
increase the vo lume . Whi le the volume is
being adjusted, the status of the drawbars is
shown on the display . (Refer to page 38 .}