Maintenance
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before cleaning.
•
To clean the unit, wipe the case with a slightly moist, lint-free cloth.
•
Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
•
Do not spray aerosol at or near the unit.
Hints and Tips
If a problem occurs, it may often be due to something very minor. The following table
contains various tips:
Problem
No power
The remote control
does not function
The unit does not
respond when
pressing any buttons
Poor radio reception
Desired station not
found
If any functional abnormality is encountered, unplug the unit from the mains socket and reconnect it
again.
• Ensure the mains cable is connected securely at both ends.
• Use the remote control near the unit.
• Point the remote control at the remote control sensor on the
unit.
• Replace the battery in the remote control with a new one.
• Remove any obstacles between the remote control and the
unit.
• The unit may freeze up during use. Switch the unit off and
then on again at the mains socket to reset the unit.
• Make sure the aerial is fully extended.
• Electrical interference in your home can cause poor
reception. Move the unit away from them (especially
those with motors and transformers).
• Weak signal. Search manually.
Solution
GB
31