Dab Display Modes - Sandstrom SSBDA13E Instruction Manual

DAB Display Modes

Every time you press the INFO button, the bottom line of the display will cycle through the
following display modes.
DLS (Dynamic Label Segment)
Dynamic label segment is a scrolling message that
the broadcaster may include with their transmissions.
The message usually includes information, such as
programme details etc.
Signal Strength
The display will show a slide bar to indicate the signal
strength, the stronger the signal, the longer the bar
will be from left to right.
Programme Type
This describes the "Style" or "genre" of music that is
being broadcast e.g. "Rock" or "Classical".
Ensemble Name
A Ensemble/multiplex is a collection of radio stations
that are bundled and transmitted on one frequency.
There are national and local multiplexes. Local ones
contain stations that are specific to that area.
DAB – unlike normal radio, groups together several radio
stations and transmits them on one frequency.
Frequency
The frequency of the present station will be displayed.
Error in Signal
A number showing the error rate. If the number is
0, it means the signal received is error free and the
signal strength is strong. If the error rate is high,
it is recommended to reorient the radio aerial or
reposition the unit.
Birate
The display will show the digital audio bit rate being
received.
Mode
The display will show DAB or FM mode.
Date and Clock
The broadcaster (Radio station) provides clock and date
information automatically so there's no need to manually set
this information. If the information is not available, the display
will show the incorrect time or date.
DLS
Signal Strength
Programme Type
Ensemble Name
Frequency
Error in signal
Bitrate
Mode
Clock
Date
GB
27