Premaintenance Procedures; Using The Hood Prop Rod - Toro 31201 Operator's Manual

CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Premaintenance
Procedures

Using the Hood Prop Rod

1. Release the hood latches.
2. Lift up on the hood until the prop rod can be
positioned behind the frame tube
3. Lower the hood until the rod is in front of and resting
against the frame tube.
4. To lower the hood, raise the hood until the prop rod
can be raised above the frame tube, then lower the
hood.
5. Secure the hood latches.
Figure 25
Service Interval Chart
(Figure 26).
30
Figure 26
1. Prop rod
1
G015806