Toro 74906 Operator's Manual page 63

Figure 103
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ratchet
7. Remove and retain the hardware on both sides of the
deck as shown in Figure 104
5. Square hole in the idler
arm for the ratchet
6. Idler grease fitting
7. Belt guide
or Figure 105.
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the shoulder bolt and nut here.
4. Remove the shoulder bolt and nut here.
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the rear deck lift attachment shoulder bolt and nut.
4. Remove the front deck lift attachment shoulder bolt and nut.
8. Raise the deck struts and secure them in the up
position. Slide the deck out to the right side of the
machine.
63
Figure 104
Figure 105