Connecting Tv With S-Video/Component Jack, Amp With Digital Audio Out Jack; Progressive Scan - Citizen C506DVC User Manual

Connecting TV With S-VIDEO/Component Jack, AMP With Digital Audio Out jack

How to Connect(DVD only)
 Connect S-VIDEO OUT or COMPONENT OUT to TV.
 Connect analog AUDIO OUTPUT(L/R) jack to TV.
3 Connect COAXIAL or OPTICAL to AMP of Dolby Digital.

Progressive Scan

WHAT IS PROGRESSIVE SCAN?
With the introduction of Digital/High-Definition TV, televisions can scan viewable information at double the frequency of standard
NTSC televisions. This provides for greater picture clarity and detail. This player provides the delivery of images to these newer
televisions with greater detail and film like quality. Connect the player to your HDTV ready television using the component video
inputs/outputs (component video cables not supplied, available at your local electronics store). Do not substitute RCA cables for
component cables, eventough they look alike, as this might damage the player.
HOW TO SETUP THE VIDEO SCAN MODE?
Connect this Player with y, Pr and Pb, if your TV has Progressive Scan and Component Video input.
Press I/P button then press the ENTER button on remote control unit to switch between Interlace & Progressive Scan mode.
It is forbidden by law to copy, broadcast, show, play in public, and rent copyrighted material without permission.
DVD video discs are copy protected, and any recordings made from these discs will be distorted.
Manufactured under license from Dolby Labs.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works.
c 99-997 Dolby Laboratories, Inc. All rights reserved.
DVD ONLY
DIGITAL
AUDIO
DIGITAL
AUDIO S-VIDEO
OPTICAL
COAXIAL
COMPONENT/
PROGRESSIVE
CONNECTING CABLE
(NOT SUPPLIED)
AMPLIFIER
DVD&VCR
ANT.IN
VIDEO AUDIO AUDIO
R L(MONO)
Y R
RF OUT
OUT
Pr Pb L
REAR PANEL OF TV
9