Toro 78452 Operator's Manual page 14

Installation
Figure 20
1. Belt tension release arm
2. Belt tension adjustment
knob
7. Remove the belt from around the PTO pulley
(Fig. 21). Additional belt slack can be obtained
(if needed) by turning the belt tension
adjustment knob.
Figure 21
1. PTO pulley
8. Replace the front grill of the tractor, securing it
with the two previously removed screws and
washers (Fig. 10).
12
2
3
1 m–3458
3. Belt tension released
1
m–3454
9. Press the button of the mid Attach–A–Matic
and twist the lever clockwise to release the
mower (Fig. 22).
1
Figure 22
1. Mid Attach–A–Matic
button
10. Pull the two spring–loaded J–pins from the deck
lift arms and twist them slightly so that they stay
disengaged (Fig. 23).
1
Figure 23
1. J–pin
2
m–3457
2. Mid Attach–A–Matic
lever
m–3456