Before Operating - Toro 03602 Operator's Manual

Before Operating

CHECK THE ENGINE OIL
CAUTION
Before servicing or making adjustments to the
machine, stop the engine and remove the key from
the switch.
Crankcase capacity is 5.0 l (5.3 qt) with the filter.
1. Park the machine on a level surface. Release the
hood latch and open the hood.
1. Hood Latch
2. Remove the dipstick from the tube cap, wipe it
clean and reinstall it into the tube cap.. Pull it out
again and check the oil level on the dipstick: The
oil level must always be in the notch area on the
dipstick.
3. If the oil level is low, remove the tube cap and
add SAE 15W-40 CD oil until the level reaches
the top of notch on the dipstick. DO NOT
OVERFILL.
4. Install the oil tube cap.
5. Close the hood and secure the latch.
Figure 1
1. Dipstick/Tub Cap
CHECK THE COOLING SYSTEM
Capacity of the system is 13.2 l (3.5 gal).
1. Park the machine on a level surface. Release the
hood latch and open the hood.
2. Check the coolant level. The coolant level should
be up to or above the mounting tabs on the tank,
when the engine is cold.
3. If coolant is low, remove the tank cap and add a
50/50 mixture of water and Peugeot-recommend-
ed anti-freeze. DO NOT USE WATER ONLY
OR ALCOHOL/ METHANOL BASE
COOLANTS.
1. Degasser tank
2. Mounting tabs
Figure 2
Figure 3
11