Toro 74919TE Operator's Manual page 39

5. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the Full mark (Figure 52).
1
3
5
6. Start the engine and drive to a flat area. Check the oil
level again.
Changing the Engine-oil Filter
Service Interval: Every 200 hours
Note: Change the engine-oil filter more frequently when
operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to Changing the
Engine Oil.
2. Change the engine-oil filter (Figure 53).
2
4
6
G008796
Figure 52
1
3
5
Note: Ensure that the oil-filter gasket touches the
engine and then an extra 3/4 turn is completed.
3. Fill the crankcase with the proper type of new oil; refer
to Changing the Oil.
39
2
4
6
3/4
Figure 53
G008748