Air Cleaner - Toro 30194 Operator's Manual

Maintenance

Air Cleaner

Service Interval/Specification
Foam Element: Clean and re-oil after every 25
operating hours.
Paper Element: Replace after every 100 operating
hours.
Note: Service the air cleaner more frequently
(every few hours) if operating
conditions are extremely dusty or
sandy.
Removing the Foam and Paper Elements
1. Disengage the blade control (PTO) and set the
parking brake.
2. Clean around the air cleaner to prevent dirt from
getting into the engine and causing damage.
Unscrew the cover nut and remove the air
cleaner cover (Fig. 20).
3. Remove the air cleaner assembly (Fig. 20).
4. Carefully slide the foam element off the paper
element (Fig. 20).
1
4
5
Figure 20
1. Cover and nut
2. Wing nut
3. Foam element
24
2
3
6
m–2595
4. Washer and grommet
5. Paper element
6. Air cleaner base
Cleaning the Foam and Paper Elements
1. Foam Element
A. Wash the foam element in liquid soap and
warm water. When the element is clean,
rinse it thoroughly.
B. Dry the element by squeezing it in a clean
cloth.
C. Put one or two ounces of oil on the element
(Fig. 21). Squeeze the element to distribute
the oil.
IMPORTANT: Replace the foam element if it
is torn or worn.
1
Figure 21
1. Foam element
2
m–1213
2. Oil