Toro 22317 Service Manual page 71

ALL UNITS/GENERAL
30. Slide the head onto the cylinder rod (Fig. 0170).
31. Install the o-ring in the groove on the rod. Remove
the tape or plastic cover from the threads (Fig.
0171).
3/1-48
IMG-0357a
Fig. 0170
IMG-0360a
Fig. 0171
32. Slide the piston onto the cylinder rod (Fig. 0172).
33. Install the nut onto the end of the rod (Fig. 0173).
Torque the nut to 100-120 ft-lbs. (135.6-162.7 Nm).
Toro Wheeled CUL Service Manual
IMG-0362a
Fig. 0172
IMG-0363a
Fig. 0173