ALL UNITS/GENERAL
26. Lubricate and install the 4-spool return springs (Fig.
0039).
27. Install the o-rings on the 2 outer return spring
covers. Install the two outside return spring covers
onto the 4-spool valve body (Fig. 0040).
3/1-12
IMG-0486a
Fig. 0039
IMG-0487a
Fig. 0040
28. Install the 2 inside spool return spring covers onto
the 2 switch block mounts (Fig. 0041).
29. Install the two neutral safety switches in the two
switch block mounts (Fig. 0042).
Toro Wheeled CUL Service Manual
IMG-0488a
Fig. 0041
IMG-0489a
Fig. 0042