Table of Contents
Advertisement
FW DOWNLOAD
Confirm the version of firmware.
1. Open a tray.
2. Press the "SERCH DOWN"
Displayed on the FL tube like "70******"
3. Turn off the power switch and power on, again.
4. Close the tray.
Upgrade the firmware
1. Connect a video monitor to video out jack on the DV-SP301.
2. Turn on th epower switch and standby switch on.
3. Setting the disc on the tray. (Down load firmware dat adisc)
4. Press "PLAY" button.
5. Will start the Firm Ware updating automatically.
Will tray open after finish the updating and take out the disc.
6. Turn off power switch.
7. Turn on the power switch, standby on and close the tray.
and "STANDBY"
button at the same time.
Firmware and regional code
DV-SP301
Advertisement
Table of Contents
