Memorising A Station - Sharp XL-HP888H Operation Manual

" Memorising a station

You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
23
1
2
3
4
5
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
Downloaded From Disc-Player.com Sharp Manuals
Perform steps 1 - 3 in "Tuning" on page 25.
Press the MEMORY/SET (MEMORY) button to enter the
preset tuning saving mode.
Within 30 seconds, press the PRESET (
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
Within 30 seconds, press the MEMORY/SET (MEMORY)
button to store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
" To recall a memorised station
Press the PRESET (
lect the desired station.
" To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
1 Press the PRESET (
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the PRESET (
tion is located.
or ) button to
" To erase entire preset memory
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Whilst pressing down the
ton, press the CLOCK/TIMER button until "TUNER CL" appears.
04/1/27 XL-HP888H(H)E3.fm
or ) button for less than 0.5 seconds to se-
or ) button for more than 0.5 seconds.
or ) button again when the desired sta-
button and the X-BASS/DEMO but-
TINSZA041AWZZ
XL-HP888H
ENGLISH
8
E-26