Panasonic WV-CF284 Operating Instructions Manual page 10

• Backlight compensation selector [BLC]
ON: Compensates the background auto-
matically if it is brighter than the
object.
OFF: This mode is used when the front
of the object is extremely bright.
Default setting: OFF
Note: Under some conditions, such as
extremely
desired compensation effect may
not be achieved even if the mode is
set to ON to detect the backlight
level.
• Light control mode selector [ALC/ELC]
ALC: Adjusts the lens iris automatically.
ELC: This mode is used for manual focus
adjustment.
Default setting: ALC
t Focus lock lever (WV-CF284 only)
Fixes the focus position after adjusting.
y Zoom lock lever (WV-CF284 only)
Fixes the zoom position after adjusting.
u Azimuth adjuster
Adjusts the azimuth angle of the cam-
era.
i Tilting table
Adjusts the tilting position of the camera.
o Panning table
Adjusts the panning position of the cam-
era.
!0 Panning table lock screw [LOCK]
Fixes the panning table.
!1 Power cable
Supplies 24 V AC or 12 V DC from an
external power source.
!2 AF switch [One Push AF] (WV-CF294
only)
Refer to page 15.
10
strong backlight,
!3 LED for AF (WV-CF294 only)
!4 Focus lever (WV-CF294 only)
!5 Zoom lock lever (WV-CF294 only)
the