Dhcp Server - Monoprice MW368R User Manual

6.1 6.1 DHCP DHCP Server Server
6.1 6.1 DHCP

DHCP Server

Server
The DHCP (Dynamic Host Control Protocol) is used to assign an IP address to the
computers on the LAN/private network. When you enable the DHCP Server, the DHCP
Server will automatically allocate an unused IP address from the IP address pool to the
requesting computer. You must specify the starting and ending address for the IP Address
pool.
� DHCP DHCP s s s s erver: DHCP erver: erver:
DHCP erver: Check the Enable
� IP IP IP IP pool pool s s s s tart/ pool tart/e e e e nd tart/
pool tart/
distribution.
�
Lease Lease Lease Lease t t t t ime: ime: ime: This indicates the length of time that a dynamic IP address may be ime:
assigned to a specific client by the DHCP server. During this time, the server will not
attempt to assign the IP address to any other client computer.
Chapter Chapter 6 6 6 6 DHCP
Chapter Chapter
Enable Enable
Enable box to enable the DHCP server.
nd a a a a ddress: nd ddress:
nd ddress: Enter the range of IP addresses for DHCP server ddress:
DHCP Server
DHCP DHCP Server Server Server
41