Advertisement
4-1 Setting Option Setup Method(continue)
Auto
8
7
8
10
9
10
Step 3 : Upon completion of the selection, check you made right selections.
Press the Mode
The display part shows like below when each time you press Mode button .
Auto
Step 4 : Pressing the ON/OFF button (
When pressing the operation ON/OFF key with the direction of remote control for unit, the sound ''Ding'' or ''Diriring''
is heard and the OPERATION ICON(
(If the diriring sound isn't heard, try again pressing the ON/OFF button.)
Step 5 : Unit operation test-run
First, Remove the battery from the remote control.
Second, Re-insert the battery into the remote control.
Third, Press ON/OFF key with the direction of remote control for set.
• Error Mode
1
If all lamps of indoor unit are flickering, Plug out, plug in power plug again and press ON/OFF key to retry.
st
2
If the unit is not working properly or all lamps are continuously flickering after setting the option code, see if the
nd
correct option code is set up for its model.
4-2
Feature
7
Push the
button to set the display panel to
Every time you push the
......
8
Push the
Push the
button to set the display panel to
Every time you push the
......
9
Push the
button to set the display panel to .
11
Every time you push the
......
10
Push the
Push the
button to set the display panel to .
Every time you push the
......
11
Push the
button to set the display panel to .
Every time you push the
......
Selection key to set the display part and check the display part.
Dry
Cool
)
) lamp of the display is flickering at the same time, then the input of option is completed.
button, the display panel reads
repeatedly.
Fan
button to
.
button, the display panel reads
repeatedly.
button, the display panel reads
repeatedly.
Heat
button to
.
button, the display panel reads
repeatedly.
button, the display panel reads
repeatedly.
Fan
.
.
Heat
Samsung Electronics
Display
Dry
Fan
Fan
Heat
Heat
Advertisement
