Binatone ADVENTURER 450 User Manual page 4

3.3 Adjusting the Speaker volume
The volume level is shown by vertical bars on the LCD screen.
You can change the volume while using your PMR, or while
the unit is idle (switched on but not in use).
a. Press the
UP button to increase, or press the
to decrease the speaker volume.
3.4 Changing Channels
The PMR has 8 available channels.
other PMR users within range, all of your units must be tuned
to the same channel.
a.
Press the MENU button, the current channel number
flashes on the LCD Screen.
b.
Press the UP or DOWN
channel.
PTT
Press the button to confirm.
c.
PTT
Note:
Refer to the "Channel Table" section of this Owner's Manual for
detailed frequency listing.
3.4.1 Setting the CTCSS sub-channel
Each channel also has 38 sub-channels(CTCSS) to let you set
up group of users within the same channel for more private
communication. If you have set the sub-channel, you can only
communicate with other PMR users tuned to the same channel
and sub-channel.
To turn the sub-channel function off, simply set the sub-
0
channel to (zero). You can communicate with any PMR users
tuned to the same channel who also turns off the sub-channel
operation (or whose PMR unit does not have the feature).
a.
Press the MENU button twice, the current CTCSS sub-
channel number flashes on the
b. UP DOWN
Press the or
CTCSS sub-channels.
PTT
Press the button to confirm the sub-channel setting.
c.
PTT
Transmitting and Receiving
The Adventurer 450
!
While you are speaking, you can not receive a transmission.
Adventurer 450 is an open-license band. Always identify
!
yourself when transmitting, as other people may be
communicating on the same channel.
3.4.2 Receiving a Call
The unit is continuously in the Receive mode when the unit
is turned ON and not transmitting. When a signal is received
on the current channel, the 'receive' icon
on the LCD Screen.
3.4.3 Transmitting (sending a speech)
a. Press and hold the PTT
The 'transmit' icon
PTT
b.
Hold the unit in a vertical position with the MIC
(Microphone) 5 cm. away from the mouth. While holding
button, speak into the
the
PTT
normal tone of voice.
button when you have finished
c.
Release the PTT
PTT
transmitting.
DOWN
To communicate with
button to select your desired
LCD Screen.
button to select one of the 38
transmission is 'one way-at-a-time.'
will be displayed
button to transmit your voice.
will be displayed on the LCD Screen.
(microphone) in a
MIC
button