Real Time Control - Spartan GOCAM User Manual

flash for more than a few seconds, you have left the camera in
SETUP mode rather than turning it ON.
7. Important: When you are ready to retrieve the SD card or change the
settings, turn the camera off first by pushing the power switch to the
OFF position. (Even in the OFF mode, the camera still consumes a
small amount of battery power. You should remove the batteries if
the camera is not in use for an extended time.)
When the camera is using GoWireless Auto, Real Time (Wireless tab in
the camera's menu) must be ON if you want to control the camera in real
time. If you are using GoWireless Premium without the mobile app, use
the portal to set Real Time Control to Yes.
Text the SMS commands below to control your camera.
Function
Add Email
Delete Email
Set Mode
Request Photo
Request Status Report
Set Send Mode

Real Time Control

DRAFT
Command
*110#email#
*111#email#
*200#mode#
*500#
*501#
*140#sendmode#
19
Parameters
0 photo
1 video
0 Instant
1 Daily report
2 off