i. Click the Add this Camera button.
If you input the values correctly you will return to the Management
page on the website.
5. Send a test picture: on the camera, in Preview mode, press OK to
take a picture then OK again to send it.
6. Using your browser, navigate to the MY CAMERAS > Manage
Photos page then refresh the browser. If you see the photo you just
took and sent, GoWireless Premium is working. All you need to do
now is to tailor your setup for your particular needs, adding email
contacts, updating camera settings, etc.
Complete Camera Setup on the Portal
Complete these steps on the portal to finish the GoWireless Premium
setup. Some are optional.
1. Change your camera settings: MY CAMERAS > Camera Settings
a. Confirm that the region and time zone are correct.
b. Verify that the all the settings are correct.
c. Consider setting some scheduled events. For example, you may
want to set events to take photos at specific times (e.g., 9 AM and
9 PM so that you will get at least two pictures every day). This is
especially useful if your camera is in a low-traffic area. The
scheduled photos are reassurance that your camera is still there
and is still working and they provide additional events each day
for the camera to contact the server, which is especially useful if
you do not have Real Time Control set to On.
d. When you are done, click Schedule a Settings Update.
DRAFT
12