3. Press the Menu button to access the Setup menu.
4. Navigate to the Wireless tab (far right), then down to Diagnostic
using the buttons:
Press or to move among the tabs (submenus).
Press or move among the submenu items.
Press or to change the value for an item.
Press OK to save all changes you've made to in a particular tab.
Press Menu return to the main menu (tabs) or to exit Setup mode
(back one level).
5. With Activate/Data Reboot highlighted, press the OK button.
A pop up box will show
Wait...
Dial *22899 (Please wait).
Then you'll see a message that says:
Successful!
Restarting. Please wait.
(If the Dial *22899 window just disappears, restart the camera manually.)
6. If you will be using GoWireless Premium (recommended, free to try
for the first month), continue to the next section. If you will be using
GoWireless Auto, go to GoWireless Auto Setup on page 17.
DRAFT
7