6. Loosen the handle
knobs until you can
move the upper handle
freely.
7. Fold the upper handle rearward as shown.
Important: Route the cables to the outside of the
handle knobs as you unfold the upper handle.
8. To unfold the handle, refer to Unfolding the
Handle on page 5.
Removing the Mower from
Storage
1. Remove the spark plug and spin the engine
rapidly using the starter to blow the excess oil from
the cylinder.
2. Install the spark plug and tighten it with a torque
wrench to 15 ft-lb (20 N m).
3. Charge the battery.
4. Connect the wire to the spark plug.
15
m-6289
m-5602c
3350-660