Vivitar 786HD User Manual page 44

Power Frequency
The options in the Frequency menu represent
the frequency of the electrical current in
fluorescent lighting sources in your locale. If
your camcorder is set to a frequency that
does not match your country's electric
current, you may see waves on the images
taken by your camcorder.
Video Format
Media Format
Power Save
You can use the 'Power Save' feature in order
to conserve you camcorder's battery life. The
designated time represents when your
camcorder will automatically power off.
When the camcorder sits idle for the
designated period of time, the camcorder will
shut off completely and will need to be
powered on again with the power button
before the next use.
Date & Time
The 'Date & Time' menu allows you to set
your camcorder's date and time. This date
and time will appear on the captured images
when the Date Stamp is set to be active.
50HZ
60HZ (Default)
MJPG
H.264
AVI
MOV
Off
1 min.
3 min. (Default)
5min.
YY/MM/DD
HR:MIN.
43
shown for 5 seconds on the
LCD after the photo has
been captured.
Selects power frequency in
your location:
50Hz: UK, Europe and
Australia
60Hz: US, Canada and
South America
Selects the Video Format.
Selects the Video Media /
File Format.
OFF - The camcorder
remains on.
1min - The camcorder
powers off after 1 minute of
sitting idle.
3min - The camcorder
powers off after 3 minutes
of sitting idle.
5min - The camcorder
powers off after 5 minutes
of sitting idle.
To set the MM/DD/YY and
Hour: Minutes:
- Press the UP/DOWN
button to change each
setting and specify the
date and time.
- Short press the POWER
button to toggle and
move between the time
and date settings.
- Press OK to save and
confirm the date and time
setting.