Toro Z453 Z Master 74416TE Operator's Manual page 9

99-8939
1. Read the Operator's
Manual.
2. Height of cut
99-8944
1. Explosion hazard—wear
eye protection.
2. Caustic liquid/chemical
burn hazard—to perform
rst aid, ush with water.
105-6183
1. Read the Operator's
Manual.
2. Use a wrench to rotate the
bypass valve.
106-5517
1. Warning—do not touch the hot surface.
3. Remove the ignition key
and read the instructions
before servicing or
performing maintenance.
3. Fire hazard—no re, open
ames, or smoking.
4. Poison hazard—keep
children away from the
battery.
3. Rotate the bypass valve out
to push the machine.
4. Rotate the bypass valve in
to drive the machine.
107-1686
1. Read the Operator's
Manual before servicing or
performing maintenance.
2. Time interval
3. Air lter
4. Hydraulic oil level
107-1866
1. Sliding and loss of control hazard and tipping hazard,
drop-offs—do not operate the machine near drop-offs,
slopes greater than 15 degrees, or water; keep a safe
distance from drop-offs; do not turn sharply while traveling
fast, instead, slow down and turn gradually; if the roll bar is
raised, wear the seat belt; if the roll bar is lowered, do not
wear the seat belt.
9
5. Tire pressure
6. Grease here
7. Check and perform any
maintenance necessary