Samsung CM1529A Owner's Instructions & Cooking Manual page 156

multi-stage
1. Hold down PrOGram LOCk (
pad. Hold together for 2 sec.
Be sure to press the pads firmly.
result : PrOG indicator appears in the digital
display.
2. Press appropriate NUmbEr pad for the desired memory number.
result : Selected memory program code
appears below the PrOGram
indicator.
3. Select power level by pressing the POWEr LEvEL pad or DEfrOST
pad.
result :
Default power level HIGH appears
in the display at first press of the
POWEr LEvEL pad.
Press the POWEr LEvEL pad or DEfrOST pad one
or more times until you get the desired power level.
4. Press NUmbEr pads to set the cooking time.
The maximum time according to each cooking
power level can be referred to in the title "Power
Levels and Time Variations" on page 7. The
NUmbEr pads will not operate or respond when you press a cooking
time exceeding the maximum value.
It is not possible to set a cooking time for longer than the maximum time
allowed on the chosen
program. It is advisable to press CaNCEL and to
enter a new power level and cooking time.
CM1529A_XEU_04030B_EN.indd 12
) and then press PrOGram ( )
5. Repeat steps 3 and 4 for II or III stage memory programming.
6. Hold down PrOGram LOCk (
press PrOGram ( ) pad. Hold together for 2
sec once again.
result : PROG indicator and memory number
indicator blink 3 times in the digital
display with a beep sound. And then the display goes
blank.
Caution: Be sure to press the pads firmly in the right position.
7. When you want to program more, repeat the procedures above again.
Memory programs are available up to 30 items.
Make sure the unit is properly programmed.
After programming is finished, all you have to do for memory cooking
is to press the NUmbEr pad. Then the selected memory program
automatically starts cooking.
You can not set up the same POWEr LEvEL or DEfrOST.
It operates as setting up sequence.
12
) and then
2011-07-13 9:39:09