Brake Pedals; Throttle Control; Fuel Gauge; Key Switch - Toro 03540 Reelmaster 5200-D Operator's Manual

Figure 18
1. Traction speed limiter
2. Reel control light
3. Speedometer

4. Brake pedals

Reel Control Light
This light (Figure 18) illuminates when the glow
plugs are preheating, or blinks when there is a
control system problem or when the ground speed
during mowing approaches the maximum preset
mowing speed.
Speedometer
The speedometer (Figure 18) indicates the ground
speed at which machine is traveling.
Brake Pedals
Two foot pedals (Figure 18) operate individual
wheel brakes for turning assistance, parking, and
to aid in obtaining better side-hill traction. A
locking pin connects the pedals for parking brake
operation and transport.
Parking Brake Latch
A knob on the left side of console (Figure 18)
actuates the parking brake lock. To engage the
parking brake, connect the pedals with the locking
pin, push down on both pedals, and pull the
parking brake latch out. To release parking brake,
press both pedals until the parking brake latch
retracts.

Key Switch

The key switch (Figure 18) has three positions:
Off, On/Preheat, and Start.
5. Parking brake latch
6. Locking pin
7. Key switch
Engine Coolant Temperature Warning
Light
This light (Figure 19) illuminates and the engine
shuts down when the engine coolant reaches a
dangerously high temperature.
Figure 19
1. Lower mow/raise control
lever

2. Fuel gauge

3. Engine coolant
temperature gauge
4. Engine oil pressure warning
light
5. Engine coolant
temperature warning
light

Throttle Control

Move the throttle control (Figure 19) forward to
increase the engine speed and rearward to decrease
speed.
Fuel Gauge
The fuel gauge (Figure 19) shows the amount of
fuel in the tank.
Lower Mow/Raise Control Lever
This lever (Figure 19) raises and lowers the cutting
units and also starts and stops the reels.
Glow Plug Indicator Light
This light (Figure 19) blinks when the glow plugs
are preheating.
23
6. Glow plug indicator light
7. Charge indicator
8. Throttle control
9. Enable/disable switch